24" 65cc Gasoline Chainsaw Cutting Wood Gas Sawing Crankcase Chain Saw

Starting Method: 1. Fill Fuel and Chain Oil Tanks Respectively,and Tighten the Caps Securely. 2. Put the Switch to "I" Position 3. While Holding the Throttle Lever Together with the Throttle Interlock, Push in the Side Throttle Lock Button and Release the Throttle Lever to Hold It at the Starting Position. 4. Pull out the Choke Knob to the Closed Position. 5. While Holding the Saw Unit Securely on the Ground,Pull the Starter Rope Vigorously. 6. When Engine Has Ignited First ,Push in the Choke Knob and Pull the Starter Again to Start the Engine 7. Allow the Engine to Warm up with the Throttle Lever Pulled Slightly. How to Assemble the Chainsaw: Pull the Guard Towards the Front Handle to Check That the Chain Brake Is Not on. Loosen the Nuts and Remove the Chain Cover. Install the Attached Spike to the Power Unit. Gear the Chain to the Sprocket and, While Fitting the Saw Chain Around the Guide bar, Mount the Guide bar to the Power Unit. Adjust the Position of Chain Tensioner Nut on the Chain Cover to the Lower Hole of Guide bar. Specification Material: Manganese Steel, Rubber Power Type: Gasoline Color: Orange Process: Quenching Assembly Required: Yes Power Source: Gas Powered Ignition System: Hand Pull Start Engine Type: Single Cylinder, Air-cooled, 2-Stroke Oil Mixture: 25:1(Gasoline: Oil) Chain Length: 60.96cm/24inch Displacement: 65cc/72cc Tank Capacity: 0.77l/26oz Speed: 2700rpm Chain Fuel Tank Capacity: 0.42l/14oz Power: 3.4kw/3.9kw Maximum Cutting Diameter: 58cm/28.33in Net Weight: 8.5kg/18.74 1bs Gross Weight: 9kg/19.841bs Package Size: 56*26*38cm/22.05*10.24*14.96in Product Size: 104*27*33cm/40.94*10.62*12.99in Package Included 1x Gas Chainsaw 1 Pair X Goggles 1 Pair X Gloves 1x Funnel 1x Guide bar 1x Guide bar Cover 1x Chain 1x Mixing Pot 1x English Manual All Accessories for Assembly